| PHN-3040 |
Far Infrared method Pre-Heater
Preheat workpieces and supplement the insufficient heat of soldering iron
| PHN-1520 |
※ PHN-3040 includs 2 pcs of stay bars.
※ Extra stay bars are available as an option.
※ PHN-1520 includs 2 pcs of stay bars.
Features
■ The entire PCB can be uniformly heated by Far Infrared heater.
■ This is the most suitable preheater for lead-free solering.
■ Temperature rise characteristics can be adjusted by setting temperature.
■ By changing the position of stay bars, any types/shapes of PCB can be heated.
■ This is the most suitable preheater for lead-free solering.
■ Temperature rise characteristics can be adjusted by setting temperature.
■ By changing the position of stay bars, any types/shapes of PCB can be heated.
Usages
1. Preheating PCB having large heat loss patterns and components on it
2. Preheating multiple-layer PCB having through holes on it.
3. Preheating components which detest rapid temperature change
4. Assistance of detaching components while repairing.
5. Preheating PCB before flow/re-flow soldering.
6. Drying of pre-flux applied to the PBC.
2. Preheating multiple-layer PCB having through holes on it.
3. Preheating components which detest rapid temperature change
4. Assistance of detaching components while repairing.
5. Preheating PCB before flow/re-flow soldering.
6. Drying of pre-flux applied to the PBC.
Soldering temperature change with/without preheating
Specifications
| Model No. | PHN-3040 | PHN-4545 |
|---|---|---|
| Input voltage | AC-100V | AC-100V |
| Power cable | 2.0m with 3 pin plug | 2.0m with 3 pin plug |
| Heating method | Far Infrared radiation method （Ceramic heater） |
Far Infrared radiation method （Ceramic heater） |
| Temperature control range | Room temperature ～ 200℃ | Room temperature ～ 200℃ |
| Temperature control method | PID control | PID control |
| Environment | Temp.：0～40℃ Humidity ：35～85%RH |
Temp.：0～40℃ Humidity ：35～85%RH |
| Body dimensions (mm) | 485W×330D×40H | 550W×480D×62H |
| Usable dimentions (mm) | 380W×270D | 430W×430D |
| Weight | 4.8kg | 10.0kg |
| Power consumption | 1000W | 1400W |
| Fuse | 10A | 20A |
Option accessory Heater lid for PHN-3040
- Material
- Stainless （lid part）
- Dimensions
(mm) - 343W×283D×40H
Features
◆ This is a lid for PHN-3040 only.
◆ It enable PHN-3040 to shorten temperature rise time, and improve rising temperature without change of setting temperature.
◆ Power consumption becomes less than half therefore you can contribute to reducing CO2 emissions.
◆ It can be installed easily to PHN-3040 you have
Test conditions
Model ：PHN-3040
Room temp. ：20°C
PCB ：1.6×80×120 (glass epoxy PCB)
Measurement ：connect the thermocouple to the surface center of PCB
PCB temperature can be rised up to 100℃ within approx. 90 sec.
Model ：PHN-3040
Room temp. ：20°C
PCB ：1.6×80×120 (glass epoxy PCB)
Measurement ：connect the thermocouple to the surface center of PCB
PCB temperature can be rised up to 100℃ within approx. 90 sec.
